Cars & Parts Wanted

WTB good motor

feeds@yuku.com (Messenger Racing) — Thu, 29 Oct 2009 06:02:18 GMT

WTB a good pinto for regional and national use. Doesn't have to be a runoffs winner but needs to be good sound pieces, complete and assembled properly. Even better if it is set up for a Swift.

PM me with details or call 806-946-7252

JM

Swift DB5 Aluminum tail allignment pin

feeds@yuku.com (Mark Schue) — Fri, 16 Oct 2009 15:21:16 GMT

Looking for the aluminum allignment pin/cones for the DB5 tail. This bolts to a tab on the edge of the roll bar.

Before I get some made, does anyone know a source or have some for sale????

Lola fuel cap

feeds@yuku.com (CarlucciS2) — Wed, 07 Oct 2009 18:29:51 GMT

Source for a fuel cell cap for a lola?

Stussy969 (at) aol com

roller wanted

feeds@yuku.com (mvellone) — Fri, 02 Oct 2009 06:18:43 GMT

We would like to find a roller s2000 if that is possible please contact mike at 480-335-9442 or just post pics
no engine please. You guys are a super cool group. mvellone@cox.net my e-mail

Logbook &plate for Tiga SC85-87

feeds@yuku.com (85TIGA) — Thu, 01 Oct 2009 08:45:56 GMT

I am looking for a Tiga SC85-87 logbook and plate off of a tub.There has to be a few somewhere with out a car??I have a tub that came from Jim Kelley's car and Wayne Lee has a tub.I want to part TOGETHER a car instead of parting one OUT !!
I have an 83 Tiga FF 2000 with a lot of the same parts and complete spare front from my Tiga SC85. I think Wayne Lee still has a tub with rollbar and engine bay braces and my wife has been wanting to go to New England area on vacation...

Trailer..

feeds@yuku.com (SportsRacerJeff) — Mon, 28 Sep 2009 18:10:03 GMT

Anyone on the west end of the country have a spare 24' tag trailer that might be available?
Let me know...
Jeff @
sportsracr@aol.com

Rear stub axle for T90 series Lola

feeds@yuku.com (race2fast) — Mon, 28 Sep 2009 16:18:11 GMT

I am in the need of a rear stub axle for my Lola T89/90.
email me at race2fast@aol.com

Thanks in advance

Lola T492 Vented rotors and aluminum top hat

feeds@yuku.com (wdavies39) — Sat, 26 Sep 2009 18:00:44 GMT

I'm racing the T492 this weekend at the Mont Tremblant Fall Festival. This morning, I suffered a failure of a rear brake rotor - it sheared all the mounting bolts and the rotor itself is split and it probably damaged the aluminum top hat. I'd like to attend the VRG event at the Glen in 3 weeks, so I'm desperately looking for parts. Can anybody recommend a supplier for a vented rotor and aluminum top hat? I'm not sure there are any in Canada. Thanks Walter Davies

Tiga SC84 Wanted

feeds@yuku.com (rickard) — Sat, 26 Sep 2009 03:37:51 GMT

Anyone out there having a SC84 to sell (or maybe a SC83).

Contact Rickard

rickard@akompani.se

Pinto Crank

feeds@yuku.com (rpg4) — Fri, 25 Sep 2009 08:44:12 GMT

Just found out I need a good 2 liter Crank . Anyone have one available ?
thanks in advance .
rp

Tiga SC84 Sidepods

feeds@yuku.com (kabover) — Wed, 16 Sep 2009 16:12:28 GMT

Looking for a left sidepod or mold to make for SC84. Thanks.

John F Boxhorn

Help! Need Centerlock bolt for RP series Royale S2

feeds@yuku.com (mbrandt1402) — Fri, 04 Sep 2009 09:39:47 GMT

I sheared one of the centerbolts on the rear of my RP-37. The guys that bought the Royale inventory have not found a replacement in their inventory. I was planning to leave for a pilgrimage to Laguna Seca in a little over a week, so I'm starting to panic a bit.

The part in question is basically a 3/4" stud about 4.5 to 5" long with a conical seat about 1/3rd down the length. I've made a sketch, but I'm not understanding how to insert it here (error on page...

Stack ST8100 dash display wanted dead or alive

feeds@yuku.com (ted arken) — Thu, 27 Aug 2009 13:49:16 GMT

Looking for a st8100 dash display with a dead battery gathering dust on your shelf because you can't bear to throw it away but don't want to spend the 200 to have the battery replaced.

I've sourced the battery and think I can resurrect them, but don't want to use my (currently) working one as a guinea pig.

If someone is interested in resurrecting theirs, or at least attempting it, send it out, I'll buy the battery and attempt to...

Need a used 10:31 ring and pinion for LD200

feeds@yuku.com (Darren Brown) — Wed, 26 Aug 2009 16:51:41 GMT

I posted this on Apexspeed and have not found a gear yet. I thought I would try on this board.

Anybody have a good used 10:31 ring and pinion (LD 200) for sale?

Thanks
Darren Brown
darrenbrown97@tx.rr.com

Quad 4 exhaust system

feeds@yuku.com (red986s) — Tue, 18 Aug 2009 18:50:28 GMT

I currently have, for lack of a better term, a high mount setup. It's slowly burning a hole in the top of my rear section. Looking for either a "mid" or "low" mount setup. See pics. Let me know. Thanks

db-2%20Q4%20engine%204.jpg

WTB Jongbloed Magnesium Centers 313

feeds@yuku.com (JK) — Tue, 18 Aug 2009 10:57:06 GMT

Jongbloed Magnesium Centers model 313. If you have any, I'll have you measure them to see if they will work for me. I may also be interested in rimhalves.

WTB: Quick-lift jack

feeds@yuku.com (red986s) — Sat, 25 Jul 2009 14:55:01 GMT

Deleted.

lola sidepod

feeds@yuku.com (CarlucciS2) — Sun, 12 Jul 2009 18:34:52 GMT

looking for a left sidepod for a 88/90.. pref good condition, fiberglass or kevlar.
stussy969@aol.com

WTB 2.0 Pinto that needs a refresh.

feeds@yuku.com (D T Benner) — Wed, 08 Jul 2009 18:28:10 GMT

Looking for a 2.0 Pinto from a top engine builder like Quicksilver or Elite with miles that needs a refresh.
Need to know the miles and what internal parts are used,type of pan is not important.
Darrell 510-825-2737 or dvbenner@yahoo.com

wanted to buy 1984 s2 Tiga

feeds@yuku.com (kevin Gray) — Fri, 03 Jul 2009 02:58:01 GMT

I would like to buy a 1984 S2 Tiga that has a documented racing history from 1984. This car should be in reasonable condition. my address is : kgraydev@bigpond.net.au