Cars & Parts For Sale

2.0 L Pinto Engine For Sale

feeds@yuku.com (Haynes Performance Autosports) — Tue, 08 Dec 2009 12:13:08 GMT

2.0 Steel Block Pinto Engine
Less oil pump bracket & water pump
Has 4 races on it (from previous owner so not sure of exact time)
Bought as is from previous owner for spare, hasn't been run since.
Last rebuilt by Scott Livingston at Motor Racing Services (March Racer).
Comes with stand seen in photos.
Being Sold AS IS.

Asking $4200 OBO

Please contact :
Joe Haynes
Haynes Performance Autosports...

Shannon S2000 with Carbon Body

feeds@yuku.com (CassaroRacing) — Fri, 27 Nov 2009 06:46:02 GMT

With some new projects in the works and plans on vintage racing I would like to give my Shannon a new home.

Shannon chassis #005 was built for Rick Ericoff to run in the American City Racing League then purchased by Jay Messenger who ran it nationally then purchased by myself. The shock package was set up by Eddie Jones (Shannon designer) of Team Andretti Green at Buttonwillow CA. I have owned a number of S2's and I must say that this is the best handling car that I have ever...

1990 Swift DB-5 For Sale

feeds@yuku.com (Don Smith) — Fri, 20 Nov 2009 11:31:13 GMT

1990 Swift DB-5

The car is a blast to drive and prep. I have the original SCCA log book and setup data from most every time the car ran. The car is in Anacortes Washington. The car has been raced in SCCA and ICSCC events. The car...

LD65 Caliper Rebuilt by Porter

feeds@yuku.com (Wayne Lee) — Tue, 17 Nov 2009 10:29:24 GMT

1- LD65 Caliper for Non-Vented Rotors, Rebuilt as bought from Neil Porter years ago and kept in Drawer.
Best Offer. Also have one LD65 in halves needing assembly as bought from Scully.
Wayne
wayne@sportsracer.com

Redline shockproof gear oil

feeds@yuku.com (endoforce5) — Mon, 16 Nov 2009 17:11:59 GMT

Four quarts Shockproof Superlight and Two quarts Shockproof Heavy. All new/unopened. $50 shipped OBO

Lola T594-T598 SR71 Engine Bay Side Frame 1" Diameter

feeds@yuku.com (Wayne Lee) — Fri, 13 Nov 2009 12:19:12 GMT

For Sale 1 Side, Lola T594-T598 SR71 Engine Bay Side Frame 1" Diameter.
SR71 Upgrade from the Stock Lola's 3/4" Diameter Tubing.
email for picture.
$150.00
Wayne
wayne@sportsracer.com

Lola T598 Radiator Used

feeds@yuku.com (Wayne Lee) — Fri, 13 Nov 2009 12:15:33 GMT

I have For Sale 1- Lola T598 Used Radiator. It should fit T594-T86/90, maybe somone else knows for sure.
Aluminum Core with Plastic End Tanks.
$75.00.
Wayne
wayne@sportsracer.com

Ugli Gripz END OF SEASON SALE

feeds@yuku.com (CSDiasio) — Fri, 13 Nov 2009 07:23:59 GMT

Ugli Gripz is having an end of the season sale on custom moldable grips. From now through November 30th, save 25% off all Ugli Gripz kit purchases. If you haven't tried Ugli Gripz on your racing wheels, now is a good time to do so!

Please visit Ugli Gripz and follow the Purchase Now link on the site. After going through the purchase near the end, enter "SALE" in the coupon code, and the amount will automatically be...

Sold! MOMO Mag Wheel for Rear of LOLA S2

feeds@yuku.com (Wayne Lee) — Thu, 12 Nov 2009 11:37:14 GMT

1 - MOMO Mag Wheel for Rear of LOLA S2, Nice Condition, has old Dry Slick mounted on it still. email for Pics if Interested.
$125.00
Wayne
wayne@sportsracer.com

Lola T594- T86/90 SR71 Tail Extension Reduced $175.00

feeds@yuku.com (Wayne Lee) — Thu, 12 Nov 2009 11:26:39 GMT

New Never Mounted SR71 Aluminum Tail Extension as Designed and Fabricated by Mike Scully. Complete
Been in the Garage for Years.
Wayne
wayne@sportsracer.com

Tiga SC84 Tail Pipe

feeds@yuku.com (Wayne Lee) — Thu, 12 Nov 2009 11:19:26 GMT

Factory Tail Pipe for Header marked SC84 bought with Parts Lot years ago from Mike Gue, Tiga Importer.
Email for Pics. $50.00 (NAPA doesn't have this one :>)
Wayne
wayne@sportsracer.com

Pinto engines for sale

feeds@yuku.com (Matthew DiRenzo) — Wed, 04 Nov 2009 08:55:49 GMT

Posting these on behalf of Fred Knoll:

1) Quicksilver engine w/6.5 hours on bottom end, dyno time only on freshened cylinder head. 143.7 HP @ 6500 on MWE dyno. Complete, including oil pump, fuel pump, carb, 7.25 clutch. Oil pump mounted on the intake side. $3,200.

2) MWE engine w/6 hours. 144.9 HP @ 6600 on MWE dyno. Complete, including oil pump, fuel pump, carb, 7.25" clutch. Oil pump mounted on the intake side. $3,200.

Direct inquiries to either...

Swift DB 2 S-2/CSR

feeds@yuku.com (backmarker) — Tue, 03 Nov 2009 11:48:43 GMT

1989 Swift DB2. Tub never damaged. New floor. Many upgrades. Engine: Olds Quad 4. All parts available for 2L Ford install. Body work for both DB2 and DB5. 3 sets of wheels. Pi Data system. Ideal car for vintage racing or track days.$19000. Contacts: Ted 920-876-3557 or tvoruz@aol.com

Tiga SC85-87 Rear Axles (NOS) New

feeds@yuku.com (Wayne Lee) — Thu, 29 Oct 2009 13:00:54 GMT

These are New Old Stock (NOS) Half Shafts Splined on both Ends for the SC85-SC87 S2's. (They might have other Applications)
These I've had since buying the remainder of the Tiga S2 stuff that Michael Gue of Essex Racing had.
They are unpainted and have what looks like a parkerized finish.
$150.00 plus shipping.

Wayne Lee
Douglas, MA
wayne@sportsracer.com

Tiga SC78-SC81 Exhaust Header

feeds@yuku.com (Wayne Lee) — Thu, 29 Oct 2009 10:56:52 GMT

Original Header for the early Tiga SC's complete but it has had some brazing done to the Mounting to Primaries section.
Will take some Pics for any interested persons.
Best Offer.

Wayne Lee
Douglas, MA
wayne@sportsracer.com

Late Style 2.0 Flywheel Like New. Best Offer

feeds@yuku.com (Wayne Lee) — Wed, 28 Oct 2009 13:26:49 GMT

Flywheel with original bright and shiny Black finish still on it. The latest version that's drilled for 5.5" BCD and 7.25" BCD
Ford Racing Part # M6375 A200. No longer avaialable from Ford. Steve Knapp at Elite has had legal copies made at cost
of $300.00 to Engine Builders minus Ring Gear. This one has like new Ring Gear beautifully welded properly in 3 places.
It doesn't look like a Starter ever engaged this Ring Gear.
Best Offer.

Wayne...

Quicksilver Crankshaft 2.0 Reduced to $275.00 or B.O.

feeds@yuku.com (Wayne Lee) — Wed, 28 Oct 2009 13:22:40 GMT

Nice Quicksilver 2.0 Crankshaft that I bought from Scully way back. Packed in grease as I received. Straight and prepped by QS.

Wayne
wayne@sportsracer.com

LD 200 Gears

feeds@yuku.com (BMARGRAF) — Tue, 27 Oct 2009 17:51:44 GMT

Last of my LD 200 Gears, $100 each:

New Top Gears
22/30 *** SALE PENDING ***
23/27 *** SALE PENDING ***

New 1st Gear
17/35

bmargraf@margrafracing.com or (530) 268-6680

Motor and Hewland for Sale - Can someone help me?

feeds@yuku.com (dneidell) — Sun, 25 Oct 2009 13:11:22 GMT

It is about time I clear out my garage. I need to find the right place to sell some of my CSR spares. I know this might not be the best forum for this stuff, but if anyone can recommend where to put ads, it would be greatly appreciated!

12A Bridgeported motor, Weber 48 IDA, nice motor, was roughly 240hp when built, swapped out last season and don't need this one anymore. Motor runs but could use freshening. $4000 obo

Hewland Mk5, 5-speed, no spare gears, good...

Steel Oil Pan SOLD

feeds@yuku.com (SwiftTiga) — Fri, 23 Oct 2009 05:42:38 GMT

For sale steel oil pan was on my spare engine last used on a Tiga. Reason for sale can't fit my Swift. The pipe is on the left (intake) side, $150 takes it. 561 789 3818
Back on the market, a vintage racer made a deal but no payment.